SHOW VIDEOS LIST

Simple and intuitive control of problem frequencies using a precision frequency-conscious compressor. It operates between 20Hz & 20KHz so can be used for much more than simple de-essing. 

A specific frequency-band triggers the process when it passes your chosen threshold level. 
The result is a gentler, more natural alternative to using a fixed EQ. The combination of 3 listen modes and a clear FFT display allows you to both hear and see where problem frequencies are – before dialling them out with a single control. There’s a simple mode for quick fixes with an advanced mode for increased functionality and fine-tuning.

FEATURES

  • An award-winning Linear Phase Dynamic EQ 
  • Transparent and accurate control of aggressive frequencies
  • Auto Level Tracking follows the energy of the input and applies same relative gain reduction as signal level changes perfect to de-ess a vocal that's quieter in verse than chorus
  • Wet/Dry control for quick parallel processing
  • Full audio spectrum operation (20Hz - 20KHz)
  • Native only plug-in.  An optimized AAX DSP version, SuprEsser DS, is also available.

COMPATIBILITY

AAX Naitve
RTAS
Audio Units
VST

SPECIFICATIONS

 

Pro Tools

Pro Tools 10.3.8, 11.3.2, 12 – AAX Native
Pro Tools 7, 8, 9, 10 – RTAS
Approved Pro Tools CPU, OS and hardware configuration: www.avid.com 
Legacy support for OS X 10.4.11 – 10.6.8  & Windows XP: RTAS
iLok USB device with latest drivers
iLok2 required for AAX plug-in

 

Audio Units

Audio Units-compatible application (Logic, Digital Performer etc.)
Mac OS X 10.7 – 10.11
Legacy 32-bit support for OS X 10.4.11 – 10.6.8
iLok USB device with latest drivers
iLok2 required for 64-bit plug-in

 

VST2

VST2-compatible application (Cubase, Nuendo, Sequoia etc.)
Mac OS X 10.7 – 10.11
Windows 7 or later
Legacy 32-bit support for OS X 10.4.11 – 10.6.8 & Windows XP
iLok USB device with latest drivers
iLok2 required for 64-bit plug-in

 

MacWindows
Pro Tools 10.3.8 – 12 (AAX Native)Pro Tools 10.3.8 – 12 (AAX Native)
Pro Tools 7 – 10 (RTAS)Pro Tools 7 – 10 (RTAS)
Logic Pro X 10.2Nuendo
Logic 8 & 9Cubase
Digital PerformerAbleton
NuendoSamplitude
CubaseSequoia
AbletonPyramix
Studio 1Studio 1

The Sonnox Oxford SuprEsser is compatible with the following hardware DSP accelerator or consoles:

Pro Tools AAX DSP-
Pro Tools TDM-
Avid Venue-
Avid S3L-
Avid S6L-
Universal Audio UAD *
Sold and supported by Universal Audio Inc. (www.uaudio.com)
-
SuprEsser SuprEsser Low Latency SuprEsser High Resolution
44.1 – 48 kHz3,060 44.1 – 48 kHz756 44.1 – 48 kHz12,276
88.2 – 96 kHz6,152 88.2 – 96 kHz1,554 88.2 – 96 kHz24,584
176.4 – 192 kHz12,336 176.4 – 192 kHz3,120 176.4 – 192 kHz49,200
NATIVE44.1 – 48 kHz: HDX44.1 – 48 kHz:- TDM44.1 – 48 kHz:-
 88.2 – 96 kHz:  88.2 – 96 kHz:-  88.2 – 96 kHz:-
 176.4 – 192 kHz:  176.4 – 192 kHz:-  176.4 – 192 kHz:-

BUNDLES

The Oxford SuprEsser is also available in the following money-saving bundles.

REVIEWS

"SuprEsser is a veritable Swiss army knife of compression."

"The Sonnox Oxford SuprEsser isn't just a good de-esser, it is an exceptional one."

"...a highly specialized production tool with a scalable GUI that is a winner."