SHOW VIDEOS LIST

Simple and intuitive control of problem frequencies using a precision frequency-conscious compressor. It operates between 20Hz & 20KHz so can be used for much more than simple de-essing. 

A specific frequency-band triggers the process when it passes your chosen threshold level. 
The result is a gentler, more natural alternative to using a fixed EQ. The combination of 3 listen modes and a clear FFT display allows you to both hear and see where problem frequencies are – before dialling them out with a single control. There’s a simple mode for quick fixes with an advanced mode for increased functionality and fine-tuning.

FEATURES

  • An award-winning Linear Phase Dynamic EQ 
  • Transparent and accurate control of aggressive frequencies
  • Auto Level Tracking follows the energy of the input and applies same relative gain reduction as signal level changes perfect to de-ess a vocal that's quieter in verse than chorus
  • Wet/Dry control for quick parallel processing
  • Full audio spectrum operation (20Hz - 20KHz)
  • Native only plug-in.  An optimized AAX DSP version, SuprEsser DS, is also available.

COMPATIBILITY

AAX Naitve
RTAS
Audio Units
VST

SPECIFICATIONS

Pro Tools
  • Pro Tools 10.3.8, 11.3.2, 12 – AAX Native
  • Pro Tools 7, 8, 9, 10 – RTAS
  • Approved Pro Tools CPU, OS and hardware configuration: www.avid.com
  • Legacy support for OS X 10.4.11 – 10.6.8 & Windows XP: RTAS
  • iLok USB device with latest drivers
  • iLok2 / iLok3 required for AAX plug-ins

 

Audio Units
  • Audio Units-compatible application (Logic, Digital Performer etc.)
  • Mac OS X 10.7 – 10.12
  • (El Capitan supported where confirmed by host DAW manufacturer)
  • Legacy 32-bit support for OS X 10.4.11 – 10.6.8
  • iLok USB device with latest drivers
  • iLok2 / iLok3 required for 64-bit plug-in

 

VST2 / VST3
  • VST2 or VST3 compatible application (Cubase, Nuendo, Sequoia etc.)
  • Mac OS X 10.7 – 10.12
  • (El Capitan supported where confirmed by host DAW manufacturer)
  • Windows 7 or later
  • Legacy 32-bit support for OS X 10.4.11 – 10.6.8 & Windows XP
  • iLok USB device with latest drivers
  • iLok2 / iLok3 required for 64-bit plug-in
Mac
Pro Tools 10.3.8 – 12 (AAX Native)
Pro Tools 7 – 10 (RTAS)
Logic Pro X 10.2
Logic 8 & 9
Digital Performer
Nuendo
Cubase
Ableton
Studio 1
Windows
Pro Tools 10.3.8 – 12 (AAX Native)
Pro Tools 7 – 10 (RTAS)
Nuendo
Cubase
Ableton
Samplitude
Sequoia
Pyramix
Studio 1

 

The Oxford SuprEsser does not support Avid’s TDM/HDX hardware DSP platform. This includes Venue, S3L and S6L systems.

SuprEsser
44.1 – 48 kHz:3,091
88.2 – 96 kHz:6,182
176.4 – 192 kHz:12,336
SuprEsser Low Latency
44.1 – 48 kHz:785
88.2 – 96 kHz:1,570
176.4 – 192 kHz:3,140
SuprEsser High Resolution
44.1 – 48 kHz:12,304
88.2 – 96 kHz:24,608
176.4 – 192 kHz:49,216
NATIVE
44.1 – 48 kHz:
88.2 – 96 kHz:
176.4 – 192 kHz:

BUNDLES

The Oxford SuprEsser is also available in the following money-saving bundles.

REVIEWS

"SuprEsser is a veritable Swiss army knife of compression."

"The Sonnox Oxford SuprEsser isn't just a good de-esser, it is an exceptional one."

"...a highly specialized production tool with a scalable GUI that is a winner."